The narrowbody freighter fleet part II: 737 NG conversions enter the fleet
Ethiopian Cargo, the launch operator for AEI's 737-800SF, took redelivery of the first of two aircraft on-lease from GECAS. Today...
Ethiopian Cargo, the launch operator for AEI's 737-800SF, took redelivery of the first of two aircraft on-lease from GECAS. Today...
On 3 April, US-based Automatic LLC redelivered a 737-400F (30161, ex-Alaska Airlines) to Italy-based Mistral Air, the airline affiliate of...
Today we begin a three-part analysis of the worldwide fleet of narrowbody jet freighters with a look at the overall...
本月上旬,位于以色列的贝德克航空集团(Bedek Aviation Group)开始对其客改货的第一架737-800BDSF(30498,前Transaero)进行飞行试验。即将完成的测试正在特拉维夫进行,而之前的客改货项目也是在此地进行的。 尽管美国联邦政府的部分停摆推迟了飞行试验,但贝德克公司告诉《货运事实》,预计联邦航空局(FAA)将在今年5月或6月对飞机进行认证。与此同时,第二架737-800已经在特拉维夫进行了改装。贝德克公司在2017年为其-700变型进行了首个737 NG项目认证,自那时以来,已重新交付了四架完成了客改货配置的737-700BDSF飞机,其中的三架交付给了阿拉斯加航空公司(Alaska Airlines),另一架交付给了香料航空公司 (Spicejet)。 回到贝德克公司的737-800BDSF飞机的徽标,飞机目前的徽标涂色并没有显示出其属于某一个特定的运营商。相反,Spectre Air Capital金融租赁公司、飞机所有者和改装客户的标志在飞机上均有显示。2017年10月,Spectre Air Capital金融租赁公司成为贝德克公司737NG改装项目的首批客户,订单为15架737-800和737-700客改货飞机,以及一个不超过15架的追加订购选项。当时,Spectre公司已确认向韩国仁川航空公司(Air Incheon)提供其前三架货机,最初预计将于2017年底交付。鉴于Spectre公司的第一架飞机已经提供给了香料航空公司,《货运事实》相信30498最终可能会与另一个运营商合作。 把眼光转向进行-800改装的特拉维夫之外,贝德克公司告诉《货运事实》,另外两个位于中国的MRO将代表其进行737NG的改装。去年,天津海特工厂引进了一架737-700BDSF,为Spectre公司进行改装,并刚刚完成。尽管MSN尚未确认,但预计天津航空货运公司将成为这架改装飞机的租赁客户。第二批-700最近在天津进行了改装。除了海特,贝德克公司还计划在宜昌三峡机场附近的贝迪克凌云工厂(Belinco)引入一架-700进行改装。
Touch labor for PEMCO's first 737-700 flex-combi is complete, and the flex-combi and full-freighter variants are awaiting their STC. Early...
Bedek's first freighter-converted 737-800BDSF takes to the skies over Tel Aviv. Earlier this month, Israel-based Bedek Aviation Group commenced flight...
Cebu Pacific's ATR 72-500 is undergoing passenger-to-freighter conversion with IPR Conversions at the Sabena Technics facility in Dinard, France. Photo...
Earlier this week, Atran Airlines, the express carrier subsidiary of Russia-based Volga Dnepr Group, announced it successfully added its first...
[wt_cli_manage_consent]